Substrate preparation

  • Flexmaster

    Coverage as a Flexible additive:
    5 litres of Flexmaster mixed with 3 parts water produces enough flexible additive for 80kg of tile adhesiveCoverage as a Primer:
    1 litre applied neat will cover 10m².
    Diluted with 3 parts water, 1 litre will cover 40m².
    Applied as a slurry coat, 1 litre will cover 18m²Dilution Rates:
    Vary depending on the application. Please refer to the product packagingDrying Time as a Primer:
    Absorbent surfaces 30 – 60 minutes, non-absorbent surfaces 45 – 90 minutes

     

    Surface/substrate:
    ✔Sand/cement screed
    ✔Plywood
    ✔Concrete
    ✔Chipboard
    ✔Flooring grade
    ✔Asphalt & Bitumen
    ✔Floorboards
    ✔Anhydrite Screeds
    ✔Gypsum Plaster
    ✔Existing tiles
    ✔Plasterboard
    ✔Underfloor Heated screeds
    ✔Cement/Sand render
    ✔Vinyl Tiles/Sheets
    ✔Concrete Brick/Block
    ✔Steel/Metal
    ✔Tilebacker Boards✔Fibre cement sheets

    Technical Data   Health & Safety Data

  • Levelflex Grey

    Surface/substrate:
    ✔ Sand/Cement Screed
    ✔ Concrete
    ✔ Plywood Overlay (6mm min)
    ✔ Chipboard Overlay (18mm min)
    ✔ Electric Underfloor Heating
    ✔ Water/Wet System Underfloor Heating
    ✔ Tile Backer Boards
    ✔ Existing Ceramic, Porcelain and
    Natural Stone Tiles
    ✔ Flooring Grade Asphalt & Bitumen
    ✔ Anhydrite Screeds
    ✔ Fibre Cement Sheet
    ✔ T & G Floorboards
    ✔ Floating Floors
    ✔ Existing Vinyl Tiles
    ✖ Steel/Metal Surfaces
    ✖ Fibreglass
    ✖ Green Screed

    Technical Data   Health & Safety Data

  • Prime + Grip

    Surface/substrate:
    ✔ Sand/Cement Screed
    ✔ Concrete
    ✔ Plywood Overlay
    ✔ Electric Underfloor Heating
    ✔ Water/Wet System Underfloor Heating
    ✔ Tile Backer Boards
    ✔ Tile on Tile
    ✔ Flooring Grade Asphalt & Bitumen
    ✔ Anhydrite Screeds
    ✔ Plaster
    ✔ Plasterboard
    ✔ Fibre Cement Sheet
    ✔ Cement/Sand Render
    ✔ Concrete Brick/Block
    ✔ T & G Floorboards
    ✔ Floating Floors
    ✔ Existing Vinyl Tiles
    ✔ Steel/Metal Surfaces
    ✔ Fibreglass
    ✔ Green Screed
    ✔ Epoxy DPM

    Technical Data   Health & Safety Data

  • Prime Plus

    Coverage:
    1 litre applied neat will cover 10m². Diluted with 3 parts water,
    1 litre will cover 40m². Applied as a slurry coat, 1 litre will cover 18m²Dilution Rates:
    Vary depending on application, Please refer to Technical dataDrying Time:
    Absorbent surfaces 30 – 60 minutes, non-absorbent surfaces
    45 – 90 minutes
    Surface/substrate:
    ✔ Sand/Cement Screed
    ✔ Concrete
    ✔ Plywood Overlay (12mm min)
    ✔ Chipboard Overlay (18mm min)
    ✔ Electric Underfloor Heating
    ✔ Water/Wet System
    Underfloor Heating
    ✔ Tile Backer Boards
    ✔ Tile on Tile
    ✔ Flooring Grade Asphalt
    & Bitumen
    ✔ Anhydrite Screeds
    ✔ Plaster
    ✔ Plasterboard
    ✔ Fibre Cement Sheet
    ✔ Cement/Sand Render
    ✔ Concrete Brick/Block
    ✔ T & G Floorboards
    ✔ Floating Floors
    ✔ Existing Vinyl Tiles
    ✔ Steel/Metal Surfaces
    ✔ Fibreglass
    ✔ Green Screed

    Technical Data   Health & Safety Data

  • Schlὕter Ditra mat – Cut to order

    Surface/substrate:
    ✔Concrete
    ✔Mortar screeds
    ✔Gypsum based screeds
    ✔Radiant heated screeds
    ✔Masonry / mixed substrates
    ✔Stucco / plaster
    ✔Balconies / terraces
    ✔Rooftop terraces
    ✔Synthetic flooring and surface coatings
    ✔Plywood, chipboard and oriented strand board (OSB)
    ✔Structural plank subflooring
    ✔Bituminous screed (paving grade asphalt)
    Technical Data
  • Tanking system

    Surface/substrate:
    ✔ Sand/Cement Screed
    ✔ Concrete
    ✔ Plywood Overlay (12mm min)
    ✔ Chipboard Overlay (18mm min)
    ✔ Electric Underfloor Heating
    ✔ Water/Wet System Underfloor Heating
    ✔ Tile Backer Boards
    ✔ Tile on Tile
    ✔ Flooring Grade Asphalt & Bitumen
    ✔ Anhydrite Screeds
    ✔ Plaster
    ✔ Plasterboard
    ✔ Fibre Cement Sheet
    ✔ Cement/Sand Render
    ✔ Concrete Brick/Block
    ✔ T & G Floorboards
    ✔ Floating Floors
    ✔ Existing Vinyl Tiles
    ✖ Steel/Metal Surfaces
    ✖ Fibreglass
    ✖ Green Screed

    Technical Data   Health & Safety Data

  • Thermal Construction Boards (Coated)

    Multipurpose lightweight construction boards that are perfect for the application of tiles and cement based screeds. They are manufactured using high density extruded polystyrene which provides excellent insulating properties. The extruded polystyrene core has a factory applied reinforced cement coating which provides excellent impact strength and fire resistance

     

    Product Code:        6mm – TA102

    12.5mm – TA104

    • Multi-Purpose Tilebacker Board
    • Essential with Electric underfloor heating
    • Easy to use
    • Suitable for walls & floors
    • Lightweight
    • Waterproof
    • High Durability
    • Ideal for wet and fully submerged areas
    • Easy to cut
    • Available from 6mm – 70mm

    (6mm & 12.5mm stocked other sizes to order)

     

  • Tilemaster Anti-fracture mat – Cut to order

    Surface/substrate:
    ✔ Sand/Cement Screed
    ✔ Concrete
    ✔ Plywood Overlay (6mm min)
    ✔ Chipboard Overlay (18mm min)
    ✔ Electric Underfloor Heating
    ✔ Water/Wet System Underfloor Heating
    ✔ Tile Backer Boards
    ✔ Existing Ceramic, Porcelain and
    Natural Stone Tiles
    ✔ Flooring Grade Asphalt & Bitumen
    ✔ Anhydrite Screeds
    ✔ Fibre Cement Sheet
    ✔ T & G Floorboards
    ✔ Floating Floors
    ✔ Existing Vinyl Tiles
    ✖ Steel/Metal Surfaces
    ✖ Fibreglass
    ✖ Green Screed✔ Sand/Cement Screed
    ✔ Concrete
    ✔ Plywood Overlay
    ✔ Chipboard Overlay
    ✔ Electric Underfloor Heating
    ✔ Water/Wet System
    Underfloor Heating
    ✔ Tile Backer Boards
    ✔ Tile on Tile
    ✔ Flooring Grade Asphalt
    & Bitumen
    ✔ Anhydrite Screeds
    ✔ Fibre Cement Sheet
    ✔ T & G Floorboards
    ✔ Floating Floors
    ✔ Existing Vinyl Tiles
    ✔ Steel/Metal Surfaces
    ✔ Fibreglass
    ✖ Green Screed
    Technical Data